(Amino acid + silica) adsorption thermodynamics: Effects of temperature

A thorough understanding of amino acid adsorption by mineral and oxide surfaces has a major impact on a variety of industrial and biomedical applications. Little information currently exists regarding temperature effects on most of these adsorption processes. Deeper thermodynamic analyses of their multiple temperature adsorption isotherms would aid the interpretation of the interfacial interactions. Low solution concentration adsorption isotherms for glycine, lysine and glutamic acid on a silica adsorbent were generated for T = (291, 298 and 310) K. Data analysis via the Clausius–Clapeyron method yielded the isosteric heat of adsorption as a function of fractional monolayer coverage for each adsorptive. Each amino acid showed an exothermic adsorption response. Glycine and lysine experienced a greater negative effect of increased temperature compared with glutamic acid, indicating a greater number of adsorbed molecules than glutamic acid, with the former undergoing intermolecular clustering within the adsorbed phase. Isosteric heat analyses suggest ionic interactions for lysine and hydrogen bonding for glutamic acid, both weakening with increased coverage. In contrast, initial hydrogen bonding led to ionic bonding for glycine with increasing coverage.     

Circular Dichroism of Amino Acids: Following the Structural Formation of Phenylalanine

Circular dichroism (CD) is frequently used to assess the secondary structure of peptides and proteins, whereas less attention has been given to their building blocks, that is, single amino acids, as they do not possess a secondary structure. Here, we follow the CD signal of amino acids and reveal that several acids exhibit a unique CD pattern as a function of their concentration. Accordingly, we propose an eight‐level classification of the CD signal of the various amino acids. Special focus is given to the CD pattern of phenylalanine (Phe), for which we observe the formation of an ultra‐narrow CD peak (full width at high maximum of only 5 nm). This CD peak can be attributed to the formation of Phe‐based chiral structural features. Further support for the formation of an ordered structure is given by using NMR, and the additional self‐assembly process of Phe to tubular structures.     

Approximation of the unsteady Brinkman‐Forchheimer equations by the pressure stabilization method

In this work, we propose and analyze the pressure stabilization method for the unsteady incompressible Brinkman‐Forchheimer equations. We present a time discretization scheme which can be used with any consistent finite element space approximation. Second‐order error estimate is proven. Some numerical results are also given.© 2017 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 1949–1965, 2017     

Wavelet-based estimator for the hurst parameters of fractional brownian sheet

It is proposed a class of statistical estimators H =(H_1,…,H_d) for the Hurst parameters H =(H_1,…,H_d) of fractional Brownian field via multi-dimensional wavelet analysis and least squares,which are asymptotically normal.These estimators can be used to detect self-similarity and long-range dependence in multi-dimensional signals,which is important in texture classification and improvement of diffusion tensor imaging(DTI) of nuclear magnetic resonance(NMR).Some fractional Brownian sheets will be simulated and the simulated data are used to validate these estimators.We find that when H_i ≥ 1/2,the estimators are accurate,and when H_i 1/2,there are some bias.     

考虑损伤的修正梯度弹性理论

梯度弹性理论在描述材料微结构起主导作用的力学行为时具有显著优势,将其与损伤理论相结合,可在材料破坏研究中考虑微结构的影响.基于修正梯度弹性理论,将应变张量、应变梯度张量和损伤变量作为Helmholtz自由能函数的状态变量,并在自然状态附近对自由能函数作Taylor展开,进而由热力学基本定律,推导出修正梯度弹性损伤理论本构方程的一般形式.编制有限元程序,模拟土样损伤局部化带的发展演化过程.结果表明,修正梯度弹性损伤理论消除了网格依赖性;损伤局部化带不是与损伤同时发生,而是在损伤发展到一定程度后再逐渐显现出来.     

基于时变SJC-Copula对商品期货市场间风险传染的探究

分别选取WIND商品指数和CRB指数作为衡量我国商品期货市场及国际商品期货市场综合价格的指标,利用时变SJC-Copula模型构建两者之间的动态相依结构,通过动态的尾部相关系数来探究我国商品期货市场与国际市场间的尾部相关性.实证结果表明,我国商品期货市场与国际市场间的上尾相关性要强于下尾相关性,即当商品期货价格上涨时,两个市场间更易发生风险传染.     

Determination of dynamic properties of flax fibres reinforced laminate using vibration measurements

Experimental and numerical methods to identify the linear viscoelastic properties of flax fibre reinforced polymer (FFRP) composite are presented in this study. The method relies on the evolution of storage modulus and loss factor as observed through the frequency response. Free-free symmetrically guided beams were excited in the dynamic range of 10 Hz to 4 kHz with a swept sine excitation focused around their first modes. A fractional derivative Zener model has been identified to predict the complex moduli. A modified ply constitutive law has been then implemented in a classical laminates theory calculation (CLT) routine. Overall, the Zener model fitted the experimental results well. The storage modulus was not frequency dependant, while the loss factor increased with frequency and reached a maximum value for a fibre orientation of 70°. The damping of FFRP was, respectively, 5 and 2 times higher than for equivalent carbon and glass fibres reinforced epoxy composites.     

Geometry dependence of the elongation behavior of a polypropylene melt through a micro die

A series of rheological experiments was performed for a polypropylene (PP) melt to explore its elongation behavior through a capillary die. Using an advanced twin-bore capillary rheometer with dies measuring 1.0, 0.5, and 0.25 mm in diameter, the experiments were performed at 210, 220, and 230 °C. The results indicated that the temperature of the PP melt had a significant effect on its extensional viscosity. The different decreases in the extensional viscosity values in the tested dies revealed the geometry dependence of the extensional viscosity. In the case of PP in the 0.25 mm die at 210 °C, the extensional viscosity values under different extensional strain rates were much higher than those in the other dies. Only in the 1.0 mm die did the relationship between the extensional viscosity of PP and its temperature obey the Arrhenius equation due to the larger die size which related to a slight size effect on its elongation behavior. The calculated deviations of the extensional viscosity in the tested dies demonstrated that the increasing pressure applied to the PP melt in the micro channel was related to the geometry dependence of the elongation behavior of the PP melt. The change in the extensional viscosity eventually relied on the interaction of the die geometry, the temperature, and the extensional stress of the PP melt.     

Stability and Neimark–Sacker bifurcation of a ratio‐dependence predator–prey model

In this paper, stability and bifurcation of a two‐dimensional ratio‐dependence predator–prey model has been studied in the close first quadrant . It is proved that the model undergoes a period‐doubling bifurcation in a small neighborhood of a boundary equilibrium and moreover, Neimark–Sacker bifurcation occurs at a unique positive equilibrium. We study the Neimark–Sacker bifurcation at unique positive equilibrium by choosing b as a bifurcation parameter. Some numerical simulations are presented to illustrate theocratical results. Copyright © 2017 John Wiley & Sons, Ltd.